code that identifies which satellite is transmitting information. A GPS signal contains 3 different types of information

However, modern receivers are more sensitive and can usually track through houses. The signals travel by line of sight, meaning they will pass through clouds, glass and plastic but will not go through most solid objects, such as buildings and mountains. GPS satellites transmit at least 2 low-power radio signals. Once your position has been determined, the GPS unit can calculate other information, such as Generally, a GPS receiver will track 8 or more satellites, but that depends on the time of day and where you are on the earth.

With 4 or more satellites, the receiver can determine your 3-D position (latitude, longitude and altitude). To calculate your 2-D position (latitude and longitude) and track movement, a GPS receiver must be locked on to the signal of at least 3 satellites. With distance measurements from a few more satellites, the receiver can determine a user's position and display it. Essentially, the GPS receiver measures the distance to each satellite by the amount of time it takes to receive a transmitted signal. GPS receivers use this information and trilateration to calculate a user's exact location. Each satellite transmits a unique signal and orbital parameters that allow GPS devices to decode and compute the precise location of the satellite. GPS satellites circle the Earth twice a day in a precise orbit. GPS works in any weather conditions, anywhere in the world, 24 hours a day, with no subscription fees or setup charges. The Global Positioning System (GPS) is a satellite-based navigation system made up of at least 24 satellites. What I found is there is no tutorial for interfacing of Arduino Mega with NEO-6M GPS module so I decided to make one.

Arduino mega serial port interrupt